1.Strong associative type, exhibiting high viscosity at low shear, strong pseudoplasticity and high thixotropy;
2.Excellent thickening and anti-sagging effects;
3.Free of organotin, APEO and other toxic substances;
4.Good dispersibility, which assists in the wetting and dispersion of pigments in the formulation;
5.Non-ionic nature, with performance unaffected by the pH value of the system;
6.No adverse effect on the gloss of formulated products.
HEUR-540E is a liquid water-based thickener with polyurethane components and easy application. It outperforms traditional cellulose-based thickeners (e.g., HEC hydroxyethyl cellulose, MC methyl cellulose, etc.) and acrylic thickeners in terms of thixotropy, film gloss and water resistance.
| Item | Specification |
| Appearance | Milky white liquid |
| Solid content | 40%±1% |
| Colloid charge | Non-ionic |
| Viscosity | 5000-8000 mPa·s (25℃) |
| Specific gravity | 1.02-1.06 g/cm³ |
*The above parameters represent typical results only and shall not be regarded as specifications. Refer to the actual COA for details.
Water-based coatings, water-based adhesives, water-based inks, textile coatings, leather finishing and other fields
1.Dosage: 0.2-2.0% relative to the total formulation. Conduct tests to determine the optimal dosage according to the system components and required fluidity before addition.
2.It can be added either before or after grinding. It is recommended to add a portion in the early stage and the rest in the later stage.
3.Moderate dispersibility; dilution before use is highly recommended if conditions permit, and water-based solvents can be used for dilution.
1.Associative thickening is affected by temperature: viscosity is higher at low temperatures and lower at high temperatures. Temperature conditions should be taken into account when designing the formulation.
2.Re-test shall be conducted when the batch of thickened raw materials is changed to confirm the dosage of the thickener.
3.This product may crystallize at low temperatures, and crystallization does not affect product performance. If crystallization occurs, heat the product to melt the crystals before use.
1.Store in the original sealed container;
2.Recommended storage temperature: 6-28℃;
3.Must be used up within 12 months from the date of production;
4.Avoid direct sunlight and contamination by other substances.
Available in 50kg, 125kg and IBC ton drum packaging; customized packaging can be provided according to customer requirements.
| The above data only represents our quality evaluation results obtained from laboratory tests, and does not constitute a warranty for the product’s specific properties and compliance with specific applications. Conduct specific tests as needed before use. Thank you for your selection and support! |
Related products
The company vigorously develops green chemical product technologies and actively sells environmental protection materials, synthetic materials, inks, coatings, etc.
